Download Advances in Science and Technology of Mn+1AXn Phases Ebook PDF

Advances in Science and Technology of Mn+1AXn Phases

Advances in Science and Technology of Mn+1AXn Phases
A Book

by I M Low

  • Publisher : Elsevier
  • Release : 2012-10-26
  • Pages : 474
  • ISBN : 085709601X
  • Language : En, Es, Fr & De
GET BOOK

Advances in Science and Technology of Mn+1AXn Phases presents a comprehensive review of synthesis, microstructures, properties, ab-initio calculations and applications of Mn+1AXn phases and targets the continuing research of advanced materials and ceramics. An overview of the current status, future directions, challenges and opportunities of Mn+1AXn phases that exhibit some of the best attributes of metals and ceramics is included. Students of materials science and engineering at postgraduate level will value this book as a reference source at an international level for both teaching and research in materials science and engineering. In addition to students the principal audiences of this book are ceramic researchers, materials scientists and engineers, materials physicists and chemists. The book is also an invaluable reference for the professional materials and ceramics societies. The most up-to-date and comprehensive research data on MAX phases is presented Written by highly knowledgeable and well-respected researchers in the field Discusses new and unusual properties

Advances in Sensors: Reviews, Vol. 7: Physical and Chemical Sensors: Design, Applications & Networks.

Advances in Sensors: Reviews, Vol. 7: Physical and Chemical Sensors: Design, Applications & Networks.
A Book

by Sergey Yurish

  • Publisher : Lulu.com
  • Release : 2021
  • Pages : 129
  • ISBN : 840914512X
  • Language : En, Es, Fr & De
GET BOOK

Explosion Shock Waves and High Strain Rate Phenomena

Explosion Shock Waves and High Strain Rate Phenomena
A Book

by K. Hokamoto,K. Raghukandan

  • Publisher : Materials Research Forum LLC
  • Release : 2019-08-20
  • Pages : 182
  • ISBN : 1644900335
  • Language : En, Es, Fr & De
GET BOOK

The book presents the papers presented at the 6th international conference on Explosion, Shock Wave and High Strain-Rate Phenomena (ESHP). Topics covered include: Advanced Manufacturing under Impact/Shock Loading, Detonation of High Pressure Flammable Gas in Closed Spaces, High Strain-Rate Behaviour of Auxetic Cellular Structures, Underwater Shock Waves Generation, Magnetic Pressure Welding of Aluminum Sheets, Shock Synthesis of Zirconium Oxides, Impact Joining of Dissimilar Metals, High-Speed Oblique Collision of Metals, Dynamic Behavior of Dislocation Wall Structures, Tensile Strength of Rock at High Strain Rates, Fiber Reinforced Mortar, Impact Analysis of Carbon Fiber Reinforced Polymer, Explosive Welding , Underwater Explosive Welding , Making Ultrafine Explosives, Aluminum-Steel Explosive Cladding, Explosively Cladded Aluminum Hybrid Composites, Explosive Clads with Interlayers.

Advances in Ceramics

Advances in Ceramics
Synthesis and Characterization, Processing and Specific Applications

by Costas Sikalidis

  • Publisher : BoD – Books on Demand
  • Release : 2011-08-09
  • Pages : 534
  • ISBN : 9533075058
  • Language : En, Es, Fr & De
GET BOOK

The current book contains twenty-two chapters and is divided into three sections. Section I consists of nine chapters which discuss synthesis through innovative as well as modified conventional techniques of certain advanced ceramics (e.g. target materials, high strength porous ceramics, optical and thermo-luminescent ceramics, ceramic powders and fibers) and their characterization using a combination of well known and advanced techniques. Section II is also composed of nine chapters, which are dealing with the aqueous processing of nitride ceramics, the shape and size optimization of ceramic components through design methodologies and manufacturing technologies, the sinterability and properties of ZnNb oxide ceramics, the grinding optimization, the redox behaviour of ceria based and related materials, the alloy reinforcement by ceramic particles addition, the sintering study through dihedral surface angle using AFM and the surface modification and properties induced by a laser beam in pressings of ceramic powders. Section III includes four chapters which are dealing with the deposition of ceramic powders for oxide fuel cells preparation, the perovskite type ceramics for solid fuel cells, the ceramics for laser applications and fabrication and the characterization and modeling of protonic ceramics.

Additive Manufacturing and Strategic Technologies in Advanced Ceramics

Additive Manufacturing and Strategic Technologies in Advanced Ceramics
A Book

by Kiyoshi Shimamura,Soshu Kirihara,Jun Akedo,Tatsuki Ohji,Makio Naito

  • Publisher : John Wiley & Sons
  • Release : 2016-08-18
  • Pages : 240
  • ISBN : 1119236037
  • Language : En, Es, Fr & De
GET BOOK

This volume contains a collection of 22 papers submitted from the below seven symposia held during the 11th International Symposium on Ceramic Materials and Components for Energy and Environmental Applications (CMCEE-11), June 14-19, 2015 in Vancouver, BC, Canada: Additive Manufacturing Technologies Advanced Materials, Technologies, and Devices for Electro-optical and Biomedical Applications Multifunctional Coatings for Energy and Environmental Applications Novel, Green, and Strategic Processing and Manufacturing Technologies Powder Processing Technology for Advanced Ceramics Computational Design and Modeling Materials for Extreme Environments: Ultra-high Temperature Ceramics (UHTCs) and Nanolaminated Ternary Carbides and Nitrides (MAX Phases)

Processing and Properties of Advanced Ceramics and Composites VII

Processing and Properties of Advanced Ceramics and Composites VII
Ceramic Transactions

by Morsi M. Mahmoud,Amar S. Bhalla,Narottam P. Bansal,Ricardo H. R. Castro,J. P. Singh,Navin Jose Manjooran,Gary Pickrell,Sylvia Johnson,Geoff Brennecka,Gurpreet Singh,Dongming Zhu

  • Publisher : John Wiley & Sons
  • Release : 2015-10-05
  • Pages : 464
  • ISBN : 1119183871
  • Language : En, Es, Fr & De
GET BOOK

This volume contains 40 papers from the following 10 Materials Science and Technology (MS&T'14) symposia: Rustum Roy Memorial Symposium: Processing and Performance of Materials Using Microwaves, Electric and Magnetic Fields, Ultrasound, Lasers, and Mechanical Work Advances in Dielectric Materials and Electronic Devices Innovative Processing and Synthesis of Ceramics, Glasses and Composites Advances in Ceramic Matrix Composites Sintering and Related Powder Processing Science and Technology Advanced Materials for Harsh Environments Thermal Protection Materials and Systems Advanced Solution Based Processing for Ceramic Materials Controlled Synthesis, Processing, and Applications of Structure and Functional Nanomaterials Surface Protection for Enhanced Materials Performance

Advanced Ceramic Coatings and Materials for Extreme Environments II

Advanced Ceramic Coatings and Materials for Extreme Environments II
A Book

by Dongming Zhu,Hua-Tay Lin,Yanchun Zhou,Taejin Huang

  • Publisher : John Wiley & Sons
  • Release : 2012-12-10
  • Pages : 250
  • ISBN : 1118530187
  • Language : En, Es, Fr & De
GET BOOK

Exploring advanced ceramic coatings and ultra-high temperature ceramic materials, this issue brings readers up-to-date with important new and emerging findings, materials, and applications. The nineteen papers in this issue originate from two symposia and one focused session held in January 2012, during the 36th International Conference on Advanced Ceramics and Composites (ICACC). With contributions from leading ceramics and materials researchers from around the world, this issue explores the latest advances and key challenges in advanced thermal and environmental coating processing and characterizations, advanced wear corrosion-resistant, nanocomposite, and multi-functional coatings, thermal protection systems, and more.

Advances in Ceramic Matrix Composites

Advances in Ceramic Matrix Composites
A Book

by I M Low

  • Publisher : Woodhead Publishing
  • Release : 2018-01-20
  • Pages : 842
  • ISBN : 0081021674
  • Language : En, Es, Fr & De
GET BOOK

Advances in Ceramic Matrix Composites, Second Edition, delivers an innovative approach to ceramic matrix composites, focusing on the latest advances and materials developments. As advanced ceramics and composite materials are increasingly utilized as components in batteries, fuel cells, sensors, high-temperature electronics, membranes and high-end biomedical devices, and in seals, valves, implants, and high-temperature and wear components, this book explores the substantial progress in new applications. Users will gain knowledge of the latest advances in CMCs, with an update on the role of ceramics in the fabrication of Solid Oxide Fuel Cells for energy generation, and on natural fiber-reinforced eco-friendly geopolymer and cement composites. The specialized information contained in this book will be highly valuable to researchers and graduate students in ceramic science, engineering and ceramic composites technology, and engineers and scientists in the aerospace, energy, building and construction, biomedical and automotive industries. Provides detailed coverage of parts and processing, properties and applications Includes new developments in the field, such as natural fiber-reinforced composites and the use of CMCs in Solid Oxide Fuel Cells (SOFCs) Presents state-of-the-art research, enabling the reader to understand the latest applications for CMCs

Developments in Strategic Ceramic Materials II

Developments in Strategic Ceramic Materials II
A Collection of Papers Presented at the 40th International Conference on Advanced Ceramics and Composites, January 24-29, 2016, Daytona Beach, Florida

by Waltraud M. Kriven,Jingyang Wang,Yanchun Zhou,Dongming Zhu,Gustavo Costa

  • Publisher : John Wiley & Sons
  • Release : 2017-01-31
  • Pages : 296
  • ISBN : 1119321794
  • Language : En, Es, Fr & De
GET BOOK

This issue contains 27 papers from The American Ceramic Society’s 40th International Conference on Advanced Ceramics and Composites, held in Daytona Beach, Florida, January 24-29, 2016. This issue includes papers presented in the following Symposia and Focused Sessions: Symposium 2 – Advanced Ceramic Coatings for Structural, Environmental, and Functional Applications; Symposium 10 – Virtual Materials (Computational) Design and Ceramic Genome; Symposium 11 – Advanced Materials and Innovative Processing Ideas for the Industrial Root Technology; Symposium 12 – Materials for Extreme Environments: Ultrahigh Temperature Ceramics; and Emerging Technologies Symposium–Carbon Nanostructures; and Focused Session 1 - Geopolymers and Chemically Bonded Ceramics.

Comprehensive Nanoscience and Nanotechnology

Comprehensive Nanoscience and Nanotechnology
A Book

by Anonim

  • Publisher : Academic Press
  • Release : 2019-01-02
  • Pages : 1886
  • ISBN : 012812296X
  • Language : En, Es, Fr & De
GET BOOK

Comprehensive Nanoscience and Technology, Second Edition allows researchers to navigate a very diverse, interdisciplinary and rapidly-changing field with up-to-date, comprehensive and authoritative coverage of every aspect of modern nanoscience and nanotechnology. Presents new chapters on the latest developments in the field Covers topics not discussed to this degree of detail in other works, such as biological devices and applications of nanotechnology Compiled and written by top international authorities in the field

Strategic Materials and Computational Design

Strategic Materials and Computational Design
A Book

by Waltraud M. Kriven,Yanchun Zhou,Miladin Radovic

  • Publisher : John Wiley & Sons
  • Release : 2010-11-23
  • Pages : 189
  • ISBN : 0470944099
  • Language : En, Es, Fr & De
GET BOOK

Contributions from three Focused Sessions that were part of the 34th International Conference on Advanced Ceramics and Composites (ICACC), in Daytona Beach, FL, January 24-29, 2010 are presented in this volume. The broad range of topics is captured by the Focused Session titles, which are listed as follows: FS1 - Geopolymers and other Inorganic Polymers; FS3 - Computational Design, Modeling Simulation and Characterization of Ceramics and Composites; and FS4 - Nanolaminated Ternary Carbides and Nitrides (MAX Phases). The session on Geopolymers and other Inorganic Polymers continues to attract growing attention from international researchers (USA, Australia, France, Germany, Italy, Czech Republic, and Viet Nam) and it is encouraging to see the variety of established and new applications being found for these novel and potentially useful materials. The session organizer gratefully acknowledges the support of the US Air Force Office of Scientific Research (AFOSR) through Dr. Joan Fuller. The AFOSR has continuously supported these conferences since the first meeting in Nashville, TN in 2003. Focused Session 3 was dedicated to design, modeling, simulation and characterization of ceramics and composites. 27 technical papers were presented on prediction of crystal structure and phase stability, characterization of interfaces and grain boundaries at atomic scale, optimization of electrical, optical and mechanical properties, modeling of defects and related properties, design of materials and components at different length scales, application of novel computational methods for processing. Four of these papers are included in this issue of CESP. Focused Session 4 was dedicated to MAX phases - a class of ternary carbides and nitrides with nanolaminated structure and general formula Mn+1AXn (where M is an early transition metal, A is an A-group element from IIIA to VIA, X is either C or N, and n=1, 2, 3 ...). The MAX phases have attracted recently a lot of attention because they possess unique combination of metallic- and ceramic-like properties. In all, 30 technical papers were presented during this session. Four of these papers are included in this issue.

Ultra-High Temperature Materials I

Ultra-High Temperature Materials I
Carbon (Graphene/Graphite) and Refractory Metals

by Igor L. Shabalin

  • Publisher : Springer
  • Release : 2014-05-16
  • Pages : 794
  • ISBN : 9400775873
  • Language : En, Es, Fr & De
GET BOOK

This exhaustive work in three volumes with featuring cross-reference system provides a thorough overview of ultra-high temperature materials – from elements and chemical compounds to alloys and composites. Topics included are physical (crystallographic, thermodynamic, thermo-physical, electrical, optical, physico-mechanical, nuclear) and chemical (solid-state diffusion, interaction with chemical elements and compounds, interaction with gases, vapours and aqueous solutions) properties of the individual physico-chemical phases and multi-phase materials with melting (or sublimation) points over or about 2500 °C. The first volume focuses on carbon (graphite/graphene) and refractory metals (W, Re, Os, Ta, Mo, Nb, Ir). The second and third volumes are dedicated solely to refractory (ceramic) compounds (oxides, nitrides, carbides, borides, silicides) and to the complex materials – refractory alloys, carbon and ceramic composites, respectively. It will be of interest to researchers, engineers, postgraduate, graduate and undergraduate students in various disciplines alike. The reader is provided with the full qualitative and quantitative assessment for the materials, which could be applied in various engineering devices and environmental conditions at ultra-high temperatures, on the basis of the latest updates in the field of physics, chemistry, materials science, nanotechnology and engineering.

Developments in Strategic Ceramic Materials

Developments in Strategic Ceramic Materials
Ceramic Engineering and Science Proceedings, Volume 36

by Waltraud M. Kriven

  • Publisher : John Wiley & Sons
  • Release : 2016-01-05
  • Pages : 352
  • ISBN : 1119211735
  • Language : En, Es, Fr & De
GET BOOK

Advanced Functional Materials

Advanced Functional Materials
Proceedings of Chinese Materials Conference 2017

by Yafang Han

  • Publisher : Springer
  • Release : 2018-04-19
  • Pages : 973
  • ISBN : 9811301107
  • Language : En, Es, Fr & De
GET BOOK

This proceedings volume gathers selected papers presented at the Chinese Materials Conference 2017 (CMC2017), held in Yinchuan City, Ningxia, China, on July 06-12, 2017. This book covers a wide range of metamaterials and multifunctional composites, multiferroic materials, amorphous and high-entropy alloys, advanced glass materials and devices, advanced optoelectronic and microelectronic materials, biomaterials, deformation behavior and flow units in metastable materials, advanced fibers and nano-composites, polymer materials, and nanoporous metal materials. The Chinese Materials Conference (CMC) is the most important serial conference of the Chinese Materials Research Society (C-MRS) and has been held each year since the early 1990s. The 2017 installment included 37 Symposia covering four fields: Advances in energy and environmental materials; High performance structural materials; Fundamental research on materials; and Advanced functional materials. More than 5500 participants attended the congress, and the organizers received more than 700 technical papers. Based on the recommendations of symposium organizers and after peer reviewing, 490 papers have been included in the present proceedings, which showcase the latest original research results in the field of materials, achieved by more than 300 research groups at various universities and research institutes.

Mechanical Properties and Performance of Engineering Ceramics and Composites IV

Mechanical Properties and Performance of Engineering Ceramics and Composites IV
A Book

by Jonathan Salem,Greg Hilmas,William G. Fahrenholtz

  • Publisher : John Wiley & Sons
  • Release : 2009-02-11
  • Pages : 187
  • ISBN : 9780470456354
  • Language : En, Es, Fr & De
GET BOOK

This book provides a one-stop resource with current research on advanced ceramics. It is a collection of papers from The American Ceramic Society s 32nd International Conference on Advanced Ceramics and Composites, January 27-February 1, 2008. Topics include Processing-Microstructure-Mechanical Properties Correlations; Mechanical Performance of Ternary Compounds; Mechanical Performance of Ultra-High Temperature Ceramics; and more. Articles are logically organized to provide insight into various aspects of ceramic materials and advanced ceramics. This is a valuable, up-to-date resource for researchers working in ceramics engineering.

Dynamic Behavior of Materials, Volume 1

Dynamic Behavior of Materials, Volume 1
Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics

by Vijay Chalivendra,Bo Song,Daniel Casem

  • Publisher : Springer Science & Business Media
  • Release : 2012-09-26
  • Pages : 597
  • ISBN : 1461442389
  • Language : En, Es, Fr & De
GET BOOK

Dynamic Behavior of Materials, Volume 1: Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics represents one of seven volumes of technical papers presented at the Society for Experimental Mechanics SEM 12th International Congress & Exposition on Experimental and Applied Mechanics, held at Costa Mesa, California, June 11-14, 2012. The full set of proceedings also includes volumes on Challenges in Mechanics of Time -Dependent Materials and Processes in Conventional and Multifunctional Materials, Imaging Methods for Novel Materials and Challenging Applications, Experimental and Applied Mechanics, 2nd International Symposium on the Mechanics of Biological Systems and Materials 13th International Symposium on MEMS and Nanotechnology and, Composite Materials and the 1st International Symposium on Joining Technologies for Composites.

Processing, Properties, and Design of Advanced Ceramics and Composites II

Processing, Properties, and Design of Advanced Ceramics and Composites II
A Book

by Narottam P. Bansal,Ricardo H. R. Castro,Michael Jenkins,Amit Bandyopadhyay,Susmita Bose,Amar S. Bhalla,J. P. Singh,Morsi M. Mahmoud,Gary Pickrell,Sylvia Johnson

  • Publisher : John Wiley & Sons
  • Release : 2017-10-12
  • Pages : 434
  • ISBN : 1119423813
  • Language : En, Es, Fr & De
GET BOOK

Processing, Properties, and Design of Advanced Ceramics and Composites II, Ceramic Transactions Volume 261 Narottam P. Bansal, Ricardo H. R. Castro, Michael Jenkins, Amit Bandyopadhyay, Susmita Bose, Amar Bhalla, J.P. Singh, Morsi M. Mahmoud, Gary Pickrell, and Sylvia Johnson; Editors This proceedings volume contains a collection of 36 papers (~350 pages) from the following symposia held during the 2016 Materials Science and Technology (MS&T’16) meeting held in Salt Lake City, UT, October 24-27, 2016: Advanced Materials for Harsh Environments Advances in Dielectric Materials and Electronic Devices Advances in Ceramic Matrix Composites Ceramic Optical Materials Controlled Synthesis, Processing, and Applications of Structural and Functional Nanomaterials Innovative Processing and Synthesis of Ceramics, Glasses and Composites International Standards for Properties and Performance of Advanced Ceramics Multifunctional Oxides Rustum Roy Memorial Symposium on Processing and Performance of Materials Using Microwaves, Electric, and Magnetic Fields Sintering and Related Powder Processing Science and Technology Surface Properties of Biomaterials Thermal Protection Materials and Systems Zirconia Based Materials for Cutting Edge Technology

Advanced Materials Science and Technology

Advanced Materials Science and Technology
A Book

by Shijie Zhu,Bao Rong Ni,Dong Ying Ju

  • Publisher : Trans Tech Publications Ltd
  • Release : 2013-03-11
  • Pages : 358
  • ISBN : 303826041X
  • Language : En, Es, Fr & De
GET BOOK

Selected, peer reviewed papers from the 8th International Forum on Advanced Materials Science and Technology (IFAMST 8) August 1-4, 2012, Fukuoka Institute of Technology, Japan

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II

Advanced Processing and Manufacturing Technologies for Nanostructured and Multifunctional Materials II
Ceramic Engineering and Science Proceedings, Volume 36

by Tatsuki Ohji,Mrityunjay Singh,Michael Halbig,Soshu Kirihara,Jingyang Wang

  • Publisher : John Wiley & Sons
  • Release : 2016-01-05
  • Pages : 192
  • ISBN : 1119211654
  • Language : En, Es, Fr & De
GET BOOK

Over 170 contributions (invited talks, oral presentations, and posters) were presented by participants from universities, research institutions, and industry, which offered interdisciplinary discussions indicating strong scientific and technological interest in the field of nanostructured systems. This issue contains 23 peer-reviewed papers that cover various aspects and the latest developments related to nanoscaled materials and functional ceramics.

MAX Phases

MAX Phases
Properties of Machinable Ternary Carbides and Nitrides

by Michel W. Barsoum

  • Publisher : John Wiley & Sons
  • Release : 2013-11-13
  • Pages : 436
  • ISBN : 3527654607
  • Language : En, Es, Fr & De
GET BOOK

In this comprehensive yet compact monograph, Michel W. Barsoum, one of the pioneers in the field and the leading figure in MAX phase research, summarizes and explains, from both an experimental and a theoretical viewpoint, all the features that are necessary to understand and apply these new materials. The book covers elastic, electrical, thermal, chemical and mechanical properties in different temperature regimes. By bringing together, in a unifi ed, self-contained manner, all the information on MAX phases hitherto only found scattered in the journal literature, this one-stop resource offers researchers and developers alike an insight into these fascinating materials.