Download Micro and Nanoscale Laser Processing of Hard Brittle Materials Ebook PDF

Micro and Nanoscale Laser Processing of Hard Brittle Materials

Micro and Nanoscale Laser Processing of Hard Brittle Materials
A Book

by Jiwang Yan,Nozomi Takayama

  • Publisher : Elsevier
  • Release : 2019-11-12
  • Pages : 242
  • ISBN : 0128168803
  • Language : En, Es, Fr & De
GET BOOK

Micro and Nanoscale Laser Processing of Hard Brittle Materials examines general laser-material interactions within this type of material, focusing on the nanoprocessing technologies that these phenomena have given rise to. Sections cover laser machining, healing, recovery, sintering, surface modification, texturing and microstructuring. These technologies all benefit from the characteristics of laser processing, its highly localized heating ability, and its well-defined optical properties. The book also describes frontier applications of the developed technologies, thus further emphasizing the possibility of processing hard brittle materials into complex structures with functional surfaces at both the micro and nanoscale. Provides readers with a solid understanding of laser-material interactions Helps readers choose suitable laser parameters for processing hard brittle materials Demonstrates how micro and nanoscale laser processing can be used to machine brittle materials without fracture

Ultrafast Laser Processing

Ultrafast Laser Processing
From Micro- to Nanoscale

by Koji Sugioka,Ya Cheng

  • Publisher : CRC Press
  • Release : 2013-06-24
  • Pages : 616
  • ISBN : 9814303690
  • Language : En, Es, Fr & De
GET BOOK

Over the past few decades, the rapid development of ultrafast lasers, such as femtosecond lasers and picosecond lasers, has opened up new avenues for material processing due to their unique features such as ultrashort pulse width and extremely high peak intensity. These techniques have become a common tool for micro- and nanoprocessing of a variety of materials and are now widely used for both fundamental researches and practical applications. This book is composed of 12 chapters covering relevant topics of ultrafast laser processing, including laser itself and novel beam manipulation methods for processing, fundamentals of ultrafast laser processing, nanomaterial synthesis, surface micro- and nanostructuring, micromachining, two-photon photopolymerization, internal modification/fabrication of transparent materials, applications to photonic devices and microchips for biological analysis, industrial applications, and so on. Each chapter is written by world-leading scientists in the related field so as to give comprehensive reviews in the field of ultrafast laser micro- and nanoprocessing.

Laser-assisted Micro-end Milling

Laser-assisted Micro-end Milling
A Book

by Yongho Jeon

  • Publisher : Unknown Publisher
  • Release : 2005
  • Pages : 300
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Advances in Materials Manufacturing Science and Technology XV

Advances in Materials Manufacturing Science and Technology XV
A Book

by Ru Peng Zhu,Ning He,Yu Can Fu,Chang Yong Yang

  • Publisher : Trans Tech Publications Ltd
  • Release : 2013-10-25
  • Pages : 460
  • ISBN : 3038262498
  • Language : En, Es, Fr & De
GET BOOK

The papers in this special volume represent the latest development in the field of materials manufacturing technology, spanning from the fundamentals to new technology and applications. Especially, the papers cover the topics of advanced manufacturing technology and equipment, material forming science and technology, digital manufacturing system and management, modern design theory and methodology, and MEMS and ultra precision manufacturing. Volume is indexed by Thomson Reuters CPCI-S (WoS).

Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007

Proceedings of the International Conference on Integration and Commercialization of Micro and Nanosystems 2007
A Book

by American Society of Mechanical Engineers

  • Publisher : Unknown Publisher
  • Release : 2007-06-30
  • Pages : 741
  • ISBN : 9780791842652
  • Language : En, Es, Fr & De
GET BOOK

Manufacturing Engineering and Materials Handling--2005

Manufacturing Engineering and Materials Handling--2005
Presented at 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005, Orlando, Florida, USA ; Sponsored by the Manufacturing Engineering Division, ASME ; the Materials Handling Division, ASME.

by Anonim

  • Publisher : Unknown Publisher
  • Release : 2005
  • Pages : 1487
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Materials Processing and Manufacturing III

Materials Processing and Manufacturing III
A Book

by Xiao Ming Sang,Yun Hae Kim

  • Publisher : Trans Tech Publications Ltd
  • Release : 2013-08-30
  • Pages : 3444
  • ISBN : 3038261459
  • Language : En, Es, Fr & De
GET BOOK

Selected, peer reviewed papers from the 3rd International Conference on Advanced Engineering Materials and Technology (AEMT 2013), May 11-12, 2013, Zhangjiajie, China

Microtecnic

Microtecnic
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1972
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Advances in Precision Engineering

Advances in Precision Engineering
A Book

by Jian Hong Zhao,Masanori Kunieda,Gui Lin Yang,Xue Ming Yuan

  • Publisher : Trans Tech Publications Ltd
  • Release : 2010-09-06
  • Pages : 866
  • ISBN : 3038133469
  • Language : En, Es, Fr & De
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). The objective of this special collection was to provide an excellent platform for updating and discussing the latest advances in precision engineering-related fields by researchers and engineers from research laboratories, academia and industry all over the world. The volume covers a wide gamut of topics in precision engineering-related fields, ranging over precision machining, advanced measurement techniques and green and sustainable manufacturing. This work will provide a stimulus and inspiration for future studies and advancement in precision engineering and manufacturing technologies.

Ultra-Precision Machining Technologies, CJICUPM2008

Ultra-Precision Machining Technologies, CJICUPM2008
A Book

by Julong Yuan,Shiming Ji,Dong Hui Wen,Ming Chen

  • Publisher : Trans Tech Publications Ltd
  • Release : 2009-05-05
  • Pages : 740
  • ISBN : 3038133035
  • Language : En, Es, Fr & De
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). This special volume presents the very latest findings and ideas in the field of ultra-precision machining.

Third International Symposium on Precision Mechanical Measurements

Third International Symposium on Precision Mechanical Measurements
2-6 August 2006, Urumqi, Xinjiang, China

by Kuang-Chao Fan

  • Publisher : Society of Photo Optical
  • Release : 2006
  • Pages : 964
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Proceedings of SPIE present the original research papers presented at SPIE conferences and other high-quality conferences in the broad-ranging fields of optics and photonics. These books provide prompt access to the latest innovations in research and technology in their respective fields. Proceedings of SPIE are among the most cited references in patent literature.

Indian Trade Journal

Indian Trade Journal
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 2010-04
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

JPRS Report

JPRS Report
Science & technology. Japan

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1993
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Advances in Materials Processing X

Advances in Materials Processing X
A Book

by Chuan Zhen Huang,Hong Tao Zhu,Jun Wang,Xiao Ping Li

  • Publisher : Trans Tech Publications Ltd
  • Release : 2012-04-12
  • Pages : 770
  • ISBN : 3038138169
  • Language : En, Es, Fr & De
GET BOOK

This collection of selected peer-reviewed papers includes contributions from all over the world. The topics covered include new developments and applications in subtractive processes including advanced and non-traditional processes and abrasive machining, micro/nano-fabrication, material forming, and new techniques for the processing of materials and understanding the underlying principles of materials performance enhancement. This volume will be a valuable reference source for researchers in the materials processing field who wish to understand further the underlying mechanisms and this create new and practical technologies, systems and processes. It should also be particularly useful to practising engineers in materials processing who are responsible for providing efficient and effective operations.

Thomas Register of American Manufacturers and Thomas Register Catalog File

Thomas Register of American Manufacturers and Thomas Register Catalog File
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 2003
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Vols. for 1970-71 includes manufacturers' catalogs.

Engineered Materials Abstracts

Engineered Materials Abstracts
EMA.

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1995
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Advances in Abrasive Technology XVI

Advances in Abrasive Technology XVI
A Book

by Ju Long Yuan,Ming Chen,Jun Wang,Li Bo Zhou,Bing Hai Lv

  • Publisher : Trans Tech Publications Ltd
  • Release : 2013-09-27
  • Pages : 720
  • ISBN : 3038262064
  • Language : En, Es, Fr & De
GET BOOK

Volume is indexed by Thomson Reuters CPCI-S (WoS). Abrasive machining is one kind of old technology, but it has a far-reaching impact on a broad spectrum of industries. In particular modern manufacturing, there is an ever increasing demand of advanced abrasive technology and other precision abrasive technology. The collection brings together both academic researchers and practitioners from around the world for interchange of the latest developments. The 123 papers are grouped as follows: 1: Abrasive Jet Machining; 2: Abrasive Machining; 3: Advanced Cutting Technology; 4: Brittle Material Machining; 5: CMP and Silicon Wafer Processing; 6: Coolants and Cooling; 7: Design, Fabrication and Analysis of Devices for the Applications of Abrasive Technologies; 8: EDM, Ultrasonic Machining, and Laser Machining; 9: Finishing, Lapping and Polishing; 10: Glass Molding and Related Topics; 11: Grinding Wheel and Abrasive Grain Technologies; 12: In-Process Measurement and Monitoring, Metrology; 13: Machine Tools and Systems, Tooling Processing; 14: Micro/Nano-Machining; 15: Surface Integrity and Materials Characterization; 16: Tribology in Manufacturing; 17: Truing, Dressing and ELID.

Design for Advanced Manufacturing: Technologies and Processes

Design for Advanced Manufacturing: Technologies and Processes
A Book

by LaRoux K. Gillespie

  • Publisher : McGraw Hill Professional
  • Release : 2017-05-12
  • Pages : 600
  • ISBN : 1259587460
  • Language : En, Es, Fr & De
GET BOOK

Cutting-edge coverage of the new processes, materials, and technologies that are revolutionizing the manufacturing industry Expertly edited by a past president of the Society of Manufacturing Engineers, this state-of-the-art resource picks up where the bestselling Design for Manufacturability Handbook left off. Within its pages, readers will find detailed, clearly written coverage of the materials, technologies, and processes that have been developed and adopted in the manufacturing industry over the past sixteen years. More than this, the book also includes hard-to-find technical guidance and application information that can be used on the job to actually apply these cutting-edge processes and technologies in a real-world setting. Essential for manufacturing engineers and designers, Design for Advanced Manufacturing is enhanced by a host of international contributors, making the book a true global resource. • Information on the latest technologies and processes such as 3-D printing, nanotechnology, laser cutting, prototyping, additive manufacturing, and CAD/CAM software tools • Coverage of new materials including nano, smart, and shape-memory alloys, in steels, glass, plastics, and composites

Formation of Silicon Nitride from the 19th to the 21st Century

Formation of Silicon Nitride from the 19th to the 21st Century
A Book

by Raymond C. Sangster

  • Publisher : Trans Tech Publication
  • Release : 2005
  • Pages : 948
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

The elements: Si, N, O, C and H, have strong chemical affinities for one another. Under the correct conditions, Si-N bonding will occur in almost any Si-N-(O/C/H), and many related, reaction systems; although Si-O and Si-C are formidable competitors to Si-N. The most favored Si-N compound is stoichiometric Si3N4. It comes in three common varieties: amorphous a-Si3N4 and crystalline ?-Si3N4 or ?-Si3N4. How they interrelate, how one finds them and (above all ) how one makes them - and how sometimes they just happen to form - are the subjects of this book, with due attention being paid to closely related matters.

Advances in Abrasive Technology ...

Advances in Abrasive Technology ...
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 2007
  • Pages : 329
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK