Download Plastics Ebook PDF

Metallized Plastics 2

Metallized Plastics 2
Fundamental and Applied Aspects

by K.L. Mittal

  • Publisher : Springer Science & Business Media
  • Release : 1992-03-31
  • Pages : 477
  • ISBN : 9780306441073
  • Language : En, Es, Fr & De
GET BOOK

This volume documents the proceedings of the Second Symposium on Metallized Plastics: Fundamental and Applied Aspects held under the aegis of the Dielectric Science and Technology Division of the Electrochemical Society in Montreal, Canada, May 7-10, 1990. The first symposium on this topic was held in Chicago, October 10-12, 1988 and the proceedings of l which have been chronicled in a hard-bound volume l As pointed out in the Preface to the proceedings of the first symposium the metallized plastics find scores of applications ranging from very mundane to very sophisticated. Even a cursory look at the literature will convince that this field has sprouted; and there is every reason to believe that with all the research and development activities taking place, new and exciting applications of metallized plastics will emerge. The program for the second symposium was very comprehensive as it included 46 papers covering many aspects of metallized plastics. This symposium was a testimonial to the brisk research activity and keen interest in the topic of metallized plastics. The success of this symposium reinforced our earlier belief that there was a definite need to hold symposia on this topic on a regular basis. Concomitantly, the third symposium in this vein was held in Phoenix, Arizona, October 13-18, 1991 and the fourth is planned for May 16-21, 1993 in Honolulu, Hawaii. As regards the present volume, it contains a total of 35 papers covering a variety of topics ranging from very fundamental to very applied.

Plastics Additives

Plastics Additives
A Rapra Market Report

by Geoffrey Pritchard

  • Publisher : iSmithers Rapra Publishing
  • Release : 2005
  • Pages : 197
  • ISBN : 9781859574997
  • Language : En, Es, Fr & De
GET BOOK

The additive families are considered with an outline of the technical issues and the trends driving the markets. The main marketplaces for each additive type are discussed and the trends outlined. It contains an overview of the significant trends in the four largest plastics market sectors: packaging, construction, automotive and electrical and electronics. The report focuses on the important issues within Europe, with comment on the relevant trends in North America and Asia. The report provides discussion of the trends in material consumption and specific additive groups. It also includes brief company news and information for some of the leading additive suppliers.

The Plastics Compendium: Key properties and sources

The Plastics Compendium: Key properties and sources
A Book

by Michael Hough,Rebecca Dolbey

  • Publisher : iSmithers Rapra Publishing
  • Release : 1995
  • Pages : 414
  • ISBN : 9781859570586
  • Language : En, Es, Fr & De
GET BOOK

A comprehensive collection of professionally validated comparative data, on the most widely used plastics materials. The Plastics Compendium covers thermoplastics, thermosets, composites and thermoplastic elastomers. Volume 1 of The Plastics Compendium contains clearly presented data on 351 generic and modified material types, in the following main sections property and commercial data sheets, an alphabetical trade name index, a listing of suppliers' (or their agents'), and a detailed alphabetical index to the materials for which data are listed.

Medical Plastics

Medical Plastics
Degradation Resistance and Failure Analysis

by Robert C Portnoy

  • Publisher : Cambridge University Press
  • Release : 2008-12-10
  • Pages : 218
  • ISBN : 0080950434
  • Language : En, Es, Fr & De
GET BOOK

The use of plastics is widespread. Less widespread, however, is a clear understanding and examination of the many forms of degradation inherent within the very environments these materials must perform. Medical PlasticsùDegradation Resistance & Failure Analysis fills that void. The introductory chapter gives an overview of the medical applications of plastics and the specific performance requirements they need to meet. The following chapters discuss various degrading environments and their effects including environmental stress cracking, effect of body liquids, effect of harsh environments, and various methods of sterilization. The book also discusses the failure of medical devices due to contamination, low temperature, the effects of UV light, migration of formulation components, mechanical stresses, and problems with design and fabrication. Case histories of failures of some common products used in medicine are also provided.

Extruding Plastics

Extruding Plastics
A practical processing handbook

by D.V. Rosato

  • Publisher : Springer Science & Business Media
  • Release : 1998-10-31
  • Pages : 779
  • ISBN : 9780412828102
  • Language : En, Es, Fr & De
GET BOOK

Worldwide, extrusion lines successfully process more plastics into prod ucts than other processes by consuming at least 36 wt% of all plastics. They continue to find practical solutions for new products and/ or prob lems to meet new product performances. This book, with its practical industry reviews, is a unique handbook (the first of its kind) that covers over a thousand of the potential combina tions of basic variables or problems with solutions that can occur from up-stream to down-stream equipment. Guidelines are provided for maxi mizing processing efficiency and operating at the lowest possible cost. It has been prepared with an awareness that its usefulness will depend greatly upon its simplicity and provision of essential information. It should be useful to: 0) those already extruding and desiring to obtain additional information for their line and/ or prOVide a means of reviewing other lines that can provide their line with operating improvements; (2) those processing or extruding plastics for the first time; (3) those consider ing going into another extrusion process; (4) those desiring additional information about employing the design of various products more effi ciently, with respect to both performance and cost; (5) those contemplat ing entering the business of extrusion; (6) those in new venture groups, materials development, and/ or market development; (7) those in disci plines such as nonplastics manufacturers, engineers, designers, quality control, financial, and management; and (8) those requiring a textbook on extrusion in trade schools and high schools or colleges.

Plastics Engineering

Plastics Engineering
A Book

by Russell J. Crawford,Peter Martin

  • Publisher : Butterworth-Heinemann
  • Release : 2020-01-22
  • Pages : 638
  • ISBN : 0081007108
  • Language : En, Es, Fr & De
GET BOOK

Plastics Engineering, Fourth Edition, presents basic essentials on the properties and processing behaviour of plastics and composites. The book gives engineers and technologists a sound understanding of basic principles without the introduction of unduly complex levels of mathematics or chemistry. Early chapters discuss the types of plastics currently available and describe how designers select a plastic for a particular application. Later chapters guide the reader through the mechanical behaviour of materials, along with a detailed analysis of their major processing techniques and principles. All techniques are illustrated with numerous worked examples within each chapter, with further problems provided at the end. This updated edition has been thoroughly revised to reflect major changes in plastic materials and their processing techniques that have occurred since the previous edition. The plastics and processing techniques addressed within the book have been comprehensively updated to reflect current materials and technologies, with new worked examples and problems also included. Gives new engineers and technologists a thorough understanding of the essential properties and processing behavior of plastics and composites Presents a great source of foundational information for students, early-career engineers and researchers Demonstrates how basic engineering principles in design, mechanics of materials, fluid mechanics and thermodynamics may be applied to the properties, processing and performance of modern plastic materials

Modern Plastics

Modern Plastics
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1964
  • Pages : 129
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Plastics in Medical Devices

Plastics in Medical Devices
Properties, Requirements and Applications

by Vinny R. Sastri

  • Publisher : Elsevier
  • Release : 2010-03-05
  • Pages : 352
  • ISBN : 081552028X
  • Language : En, Es, Fr & De
GET BOOK

No book has been published that gives a detailed description of all the types of plastic materials used in medical devices, the unique requirements that the materials need to comply with and the ways standard plastics can be modified to meet such needs. This book will start with an introduction to medical devices, their classification and some of the regulations (both US and global) that affect their design, production and sale. A couple of chapters will focus on all the requirements that plastics need to meet for medical device applications. The subsequent chapters describe the various types of plastic materials, their properties profiles, the advantages and disadvantages for medical device applications, the techniques by which their properties can be enhanced, and real-world examples of their use. Comparative tables will allow readers to find the right classes of materials suitable for their applications or new product development needs.

PVC Plastics

PVC Plastics
Properties, Processing, and Applications

by W. V. Titow

  • Publisher : Springer Science & Business Media
  • Release : 2012-12-06
  • Pages : 902
  • ISBN : 9401138346
  • Language : En, Es, Fr & De
GET BOOK

This book originated from my Publisher's request for anew, concise account of PVC plastics in terms of their nature, properties, process ing, and applications. There is thus, inevitably, an extensive thematic overlap with my-still relatively recent-PVC Technology (4th edi tion), and I have drawn liberally on that source for a substantial amount of relevant basic material. However, the present book is by no means merely an abridgement of the earlier one: whilst indeed considerably shorter, it is not only comparable in scope and general coverage of the subject, but also contains much new information. I have made a point of again strongly featuring the numerous standards relevant-and in many cases cardinal-to the testing and characterisa tion of PVC materials and products, and to the evaluation of their properties and performance: these standards are an indispensable part of the technology of PVC plastics, and nobody concerned with any aspect of this complex subject should fail to recognise that fact. It is ever a pleasure to express appreciation and thanks where they are due. I am grateful to Dipl-Ing. H. E. Luben of Brabender OHG, Duisburg, FRG, not only for the up-to-date information he provided on Brabender equipment, but also most particularly for his exception ally friendly, helpful attitude in all our contacts, and for the trouble he took to make some illustrations and figures available in the form convenient for direct reproduction.

Glass Fiber Reinforced Plastics

Glass Fiber Reinforced Plastics
A Book

by Boris Abramovich Kiselev

  • Publisher : Unknown Publisher
  • Release : 1963
  • Pages : 337
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Contents: Fibrous glass fillers Binders used in the glass plastic industry Method of manufacturing glass plastics and glass plastic articles Properties of fiberglass Primary areas for use of glass fibre reinforced plastics.

Plastics Progress, a Brief Review of the United States Plastics Industry and Trade

Plastics Progress, a Brief Review of the United States Plastics Industry and Trade
A Book

by United States Foreign and Domestic Commerce Bureau

  • Publisher : Unknown Publisher
  • Release : 1939
  • Pages : 13
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Economic Impact Analysis of Effluent Limitations and Standards for the Plastics Molding and Forming Industry

Economic Impact Analysis of Effluent Limitations and Standards for the Plastics Molding and Forming Industry
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1984
  • Pages : 129
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Introduction to Plastics Engineering

Introduction to Plastics Engineering
A Book

by Vijay K. Stokes

  • Publisher : John Wiley & Sons
  • Release : 2020-04-02
  • Pages : 1064
  • ISBN : 1119536529
  • Language : En, Es, Fr & De
GET BOOK

The authoritative introduction to all aspects of plastics engineering — offering both academic and industry perspectives in one complete volume. Introduction to Plastics Engineering provides a self-contained introduction to plastics engineering. A unique synergistic approach explores all aspects of material use — concepts, mechanics, materials, part design, part fabrication, and assembly — required for converting plastic materials, mainly in the form of small pellets, into useful products. Thermoplastics, thermosets, elastomers, and advanced composites, the four disparate application areas of polymers normally treated as separate subjects, are covered together. Divided into five parts — Concepts, Mechanics, Materials, Part Processing and Assembly, and Material Systems — this inclusive volume enables readers to gain a well-rounded, foundational knowledge of plastics engineering. Chapters cover topics including the structure of polymers, how concepts from polymer physics explain the macro behavior of plastics, evolving concepts for plastics use, simple mechanics principles and their role in plastics engineering, models for the behavior of solids and fluids, and the mechanisms underlying the stiffening of plastics by embedded fibers. Drawing from his over fifty years in both academia and industry, Author Vijay Stokes uses the synergy between fundamentals and applications to provide a more meaningful introduction to plastics. Examines every facet of plastics engineering from materials and fabrication methods to advanced composites Provides accurate, up-to-date information for students and engineers both new to plastics and highly experienced with them Offers a practical guide to large number of materials and their applications Addresses current issues for mechanical design, part performance, and part fabrication Introduction to Plastics Engineering is an ideal text for practicing engineers, researchers, and students in mechanical and plastics engineering and related industries.

Plastics and the Environment

Plastics and the Environment
A Book

by R. M. Harrison,R. E. Hester

  • Publisher : Royal Society of Chemistry
  • Release : 2018-11-20
  • Pages : 192
  • ISBN : 1788012410
  • Language : En, Es, Fr & De
GET BOOK

Plastic has become a ubiquitous part of modern life. A cheap, lightweight material, it is used in everything from food packaging to consumer electronics and microbeads in cosmetic products. However, we are becoming increasingly aware of the problems our reliance on plastic is causing in the environment. For example, recent campaigns have highlighted the build-up of microbeads in the marine environment and the damage this is doing to wildlife, and the problem of marine litter, often in very remote locations. There are also concerns over exposure to plasticisers and their possible consequences for health. The plastics industry is under increasing pressure, not only from the government and environmental groups, but also from consumers, to improve the environmental impact of their products. This book presents an introduction to the uses of plastics and an overview of how they interact with the environment. It is a valuable resource for students studying environmental science as well as researchers working in the plastics industry, and policy makers and regulators concerned with waste disposal and environmental planning and conservation.

Plastics Design Handbook

Plastics Design Handbook
A Book

by Marlene G. Rosato,D.V. Rosato

  • Publisher : Springer Science & Business Media
  • Release : 2013-11-27
  • Pages : 680
  • ISBN : 1461513995
  • Language : En, Es, Fr & De
GET BOOK

This book provides a simplified and practical approach to designing with plastics that funda mentally relates to the load, temperature, time, and environment subjected to a product. It will provide the basic behaviors in what to consider when designing plastic products to meet performance and cost requirements. Important aspects are presented such as understanding the advantages of different shapes and how they influence designs. Information is concise, comprehensive, and practical. Review includes designing with plastics based on material and process behaviors. As de signing with any materials (plastic, steel, aluminum, wood, etc.) it is important to know their behaviors in order to maximize product performance-to-cost efficiency. Examples of many different designed products are reviewed. They range from toys to medical devices to cars to boats to underwater devices to containers to springs to pipes to buildings to aircraft to space craft. The reader's product to be designed can directly or indirectly be related to product design reviews in the book. Important are behaviors associated and interrelated with plastic materials (thermoplastics, thermosets, elastomers, reinforced plastics, etc.) and fabricating processes (extrusion, injec tion molding, blow molding, forming, foaming, rotational molding, etc.). They are presented so that the technical or non-technical reader can readily understand the interrelationships.

Additives for Plastics

Additives for Plastics
New Developments

by Raymond B. Seymour

  • Publisher : Elsevier
  • Release : 2013-09-03
  • Pages : 128
  • ISBN : 1483257428
  • Language : En, Es, Fr & De
GET BOOK

Additives for Plastics, Volume 2, New Developments contains papers presented at the Symposium on Additives for Plastics, sponsored by the Organic Coatings and Plastics Division, American Chemical Society, and held in Anaheim, California, spring 1978. The volume opens with a chapter on developments in fillers for plastics. This is followed by separate chapters on the principles of micro packing; commercially available glass fillers; the use of precipitated silicas in ethylene-vinyl acetate copolymers to provide a versatile class of materials for many applications; and advancements in plasticizers. Subsequent chapters deal with the effect of additives on the viscosity of filled resin; the successful application of titanate coupling agents in thermoplastics; electrical, thermal, solvent and anti-fungal properties of organotin-containing poly (ethyleneimine); and additives for stabilizing polymer systems. The final two chapters discuss the ultraviolet stabilization of high-impact polystyrene and the various types of colorants for plastics, respectively.

Metallized Plastics 7: Fundamental and Applied Aspects

Metallized Plastics 7: Fundamental and Applied Aspects
A Book

by Kash L. Mittal

  • Publisher : CRC Press
  • Release : 2020-04-12
  • Pages : 306
  • ISBN : 1000083160
  • Language : En, Es, Fr & De
GET BOOK

This volume documents the proceedings of the 7th Symposium on Metallized Plastics: Fundamental and Applied Aspects, held in Newark, New Jersey, December 2-3, 1999. This volume contains a total of 16 papers, which were all rigorously peer reviewed and suitably revised before inclusion. The book is divided into two parts: Metallization Techniques and Properties of Metal Deposits, and Interfacial and Adhesion Aspects. The topics covered include: various metallization techniques for a variety of plastics including some novel developments involving suitable plastic pretreatments; modification of polymers by plasma and ion-assisted reactions; metal doped plasma polymer films; metal-polyimide nanocomposite films; investigation of metal/polymer interactions by a variety of techniques; ways to improve adhesion of metal/polymer systems; modeling of metal/polymer interfaces; application of surface analytical techniques in the arena of metallized plastics; and ultrathin films on metal surfaces. This volume offers a wealth of information and represents current commentary on the R&D activity taking place in the technologically highly important field of metallized plastics and is of value and interest to anyone interested in the fundamental or applied aspects of metallized plastics.

Plastics World

Plastics World
A Book

by Anonim

  • Publisher : Unknown Publisher
  • Release : 1987
  • Pages : 129
  • ISBN : 9876543210XXX
  • Language : En, Es, Fr & De
GET BOOK

Practical Guide to High Performance Engineering Plastics

Practical Guide to High Performance Engineering Plastics
A Book

by David J Kemmish

  • Publisher : Smithers Rapra
  • Release : 2011-07-30
  • Pages : 134
  • ISBN : 1847355781
  • Language : En, Es, Fr & De
GET BOOK

High performance engineering plastics are used in a vast range of applications and environments. They are becoming increasingly important because of trends towards more reliable and higher performance machines and devices. This book gives readers a working knowledge and understanding of high performance engineering plastics. It starts with a simple, practical overview of key properties and principles. In each of the chapters there are sections on production chemistry, product forms, properties, processing and applications. There is a strong bias towards materials and concepts which are used in practice. The materials covered include high performance Polyethersulfones, Polyetherimides, Polyphthalamides, Polyphenylene Sulfide, Polyaryletherketones, Polyamideimides, Polyimides, Polybenzimidazole, Liquid Crystalline Polyesters and Perfluoropolymers. The reader will develop the ability to understand why materials are chosen for certain applications, why those materials have particular properties and how those properties can be modified. This will facilitate conversations with both materials suppliers and end users. It will help to identify the best and most cost effective solutions.

Particulate Plastics in Terrestrial and Aquatic Environments

Particulate Plastics in Terrestrial and Aquatic Environments
A Book

by Nanthi S. Bolan,M.B. Kirkham,Claudia Halsband,Dayanthi Nugegoda,Yong Sik Ok

  • Publisher : CRC Press
  • Release : 2020-07-30
  • Pages : 442
  • ISBN : 1000081494
  • Language : En, Es, Fr & De
GET BOOK

The manufacture of plastic as well as its indiscriminate disposal and destruction by incineration pollutes atmospheric, terrestrial, and aquatic ecosystems. Synthetic plastics do not break down; they accumulate in the environment as macro-, micro-, and nanoplastics. These particulate plastics are a major source of pollutants in soil and marine ecosystems. Particulate Plastics in Terrestrial and Aquatic Environments provides a fundamental understanding of the sources of these plastics and the threats they pose to the environment. The book demonstrates the ecotoxicity of particulate plastics using case studies and offers management practices to mitigate particulate plastic contamination in the environment. Features · Describes physical and chemical properties of particulate plastics in terrestrial and aquatic ecosystems · Presents information on characteristics of particulate plastics as impacted by weathering processes · Provides numerous approaches for managing particulate plastic contamination · Identifies sources of particulate plastics in the environment; distribution and characteristics of particulate plastics; and management strategies of particulate plastics Written by a global team of scientists, this book is for researchers in the fields of environmental safety and waste management or individuals interested in the impact of particulate plastics on environmental health.